请欣赏,客户工厂使用实拍:

产品简介:
MJ-F3-250-70-4D 高速型-得益力产品视频

F3方木多片锯针对短方木加工特别研发设计,专为集成材企业量身打造的超高速方木多片锯,采用世界顶尖加工中心精密加工构件,使设备高速稳定运行,锯切锯路薄,精度高,产能最大化,适用于规模化生产。

for the short wood processing, provide the timber enterprises the ultra-high speed square timber multi blade saw machine. Use the world's top precision machining center to process components which ensures the machine operated stable in high-speed while cutting kerf thin, high precision and maximum productivity. The machine is suitable for mass production.

产品示图:

MJ-F3-250-70-4D 高速型-得益力产品视频

产品特点:

MJ-F3-250-70-4D 高速型-得益力产品视频

优质加厚钢板,箱体厚实稳重,运行稳定,防震防抖,噪音小。

High quality steel plate, solid and stable, stable operation, shockproof, anti-shake and low noise.

MJ-F3-250-70-4D 高速型-得益力产品视频

全自动智能化加工工件,精度以微米计量,以提高设备质量和使用寿命,为客户减少修磨率。

The automatic intelligent processing workpiece and the accuracy of micrometer measurement improve the quality and service life of machine and reduce the rate of grinding for customers.

MJ-F3-250-70-4D 高速型-得益力产品视频

轴总成:特殊主轴结构,精密装配,低温升,寿命长,适合薄锯片加工,锯切稳定又省材。

Shaft assembly: special spindle structure, precise assembly, low temperature rise, long service life, suitable for thin saw blade machining, stable sawing and material saving.

MJ-F3-250-70-4D 高速型-得益力产品视频

 

欧标专利皮带轮,易拆装,更换便利,仅需旋开紧固螺栓,就可轻松拆下。

European standard belt pulle , easily assemble and disassemble

MJ-F3-250-70-4D 高速型-得益力产品视频
MJ-F3-250-70-4D 高速型-得益力产品视频

轴承,采用国际知名品牌NSK、SKF轴承,无尘加热装配,使用寿命长,减少客户维修成本

Bearings: the internationally famous brand NSK、SKF bearings and dustlessness heating assembly extends the service life of the machine and reduces the service costs for customers.

MJ-F3-250-70-4D 高速型-得益力产品视频轴芯喷水技术:时时冷却锯片,提高锯切精度,降低锯片修磨率、延长锯片使用寿命。

Sprinkler technology: always cooling saw blade, improve cutting precision, reduce sharpening rate of saw blade and prolong service life of saw blade.

MJ-F3-250-70-4D 高速型-得益力产品视频机盖增加感应开关,当机盖打开时,机器自动断电源,避免人工操作造成意外伤害

Cover opening and closing, increase the sensor the sensor switch. when the conver is open, the machine automatically disconnect the power, to avoid accidental injury caused by workers.

MJ-F3-250-70-4D 高速型-得益力产品视频高密度齿轮,耐磨、耐冲击、韧性好,使设备长效稳定运行。

High-density gear, wear-resistant, shock resistance, good toughness enables the long-term stable operation of equipment.

MJ-F3-250-70-4D 高速型-得益力产品视频MJ-F3-250-70-4D 高速型-得益力产品视频

四级传动齿轮减速机,采用高强度低碳合金钢, 经渗碳淬火而成,齿面硬度达HRC52,使用寿命是普通减速机的3-5倍

The  four-stage transmission gear reducer adopts the high-strength and  low-carbon alloy steel and quenched by carbon, The handness of tooth surface is HRC52 and the service life is 3-5 times the normal reducer.

 

MJ-F3-250-70-4D 高速型-得益力产品视频淬火辊轮,增大压送面积,使压力均匀、强劲有力、不卡料,使锯切不易偏摆、烧片。

The quenching roller increases the pressure area so that the pressure uniform, strong and does not clamp material which makes the cutting not easy sway and burning saw blades.

MJ-F3-250-70-4D 高速型-得益力产品视频支点式防弹刺轮,强力抓取木料,防止木料反弹,使送料稳定。

The Fulcrum-style bullet-proof jab and strong grasp of wood fully prevent the wood rebound and insure the feeding stability.

MJ-F3-250-70-4D 高速型-得益力产品视频高精度轴筒,降低设备运行时的摩损率,提高设备稳定性能,令设备长效运行。

High precision of cylinder can reduce the loss rate of the machine during operation, improve the stability of the machine and make the machine run for long time.

MJ-F3-250-70-4D 高速型-得益力产品视频淬火链轮,经表皮淬火处理,使其以最佳硬度和韧性,耐磨耐冲击。

Quenching gear, with the best hardness and toughness,  To wear and inpact resistance.

 

MJ-F3-250-70-4D 高速型-得益力产品视频

双重防弹片装置,有效防止木料反弹伤人,安全可靠。

Double rebound device effectively prevent the rebound of wood injury which is safe and reliable.

MJ-F3-250-70-4D 高速型-得益力产品视频

 

可安装超薄锯片,且锯切精度高、锯面平整、减少锯路损耗、提高出材率。

The machine operated stable in high-speed while cutting kerf thin, highprecision and maximum productivity

MJ-F3-250-70-4D 高速型-得益力产品视频

 

可增加红外线装置,测算木材锯切路径,提高木材出材率,减少浪费。

The infrared device calculates the sawing path of wood which increase the output rate of wood and reduce waste.

产品参数:

MJ-F3-250-70-4D 高速型-得益力产品视频

(供稿:2017年09月06日 福建省得力机电有限公司讯息部)